FAQ Topic: Water Production

What can I do if I am concerned about lead in the water?

The most common cause of lead in drinking water is the corrosion of plumbing fixtures and solder containing lead. The drinking water supplied by Oakwood from the water treatment plants do not contain lead at a detectable level.  As a precaution, lead usually can be eliminated from drinking water by allowing cold water to run … Continued

Why is my water cloudy?

Cloudy water is usually caused by the release of dissolved air from water. This is quite common and harmless. When watched closely , the dissolved air or cloudiness slowly clears up.

Does Oakwood add fluoride to the water?

Oakwood does not add fluoride to the water. Fluoride occurs naturally in Oakwood’s well water. The natural fluoride level in Oakwood’s ground water is approximately 0.21 milligrams per liter.

Close window
Feedback