What should I do if my water is discolored?
We suggest turning on the cold water from your bathtub and let it run for 3-5 minutes.
FAQ Topic: Water Services
What can I do if I am concerned about lead in the water?
The most common cause of lead in drinking water is the corrosion of plumbing fixtures and solder containing lead. The drinking water supplied by Oakwood from the water treatment plants do not contain lead at a detectable level. As a precaution, lead usually can be eliminated from drinking water by allowing cold water to run … Continued
Why is my water cloudy?
Cloudy water is usually caused by the release of dissolved air from water. This is quite common and harmless. When watched closely , the dissolved air or cloudiness slowly clears up.
Does Oakwood add fluoride to the water?
Oakwood does not add fluoride to the water. Fluoride occurs naturally in Oakwood’s well water. The natural fluoride level in Oakwood’s ground water is approximately 0.21 milligrams per liter.
What is the hardness of Oakwood’s water?
Water hardness is caused by natural minerals in the well water. The average hardness for Oakwood’s water is 200 milligrams per liter (or 12 grains per gallon).